DZXCANTE-008L080

DZXCANTE-008L080

SKU
322846
  • Buy 5 for $471.00 each and save 5%
  • Buy 10 for $446.00 each and save 10%
$495.00

For bulk orders request a quote 

Product Details

The DZXCANTE-008L080 digital servo drive is designed to drive brushed and brushless servomotors from a compact form factor ideal for embedded applications. This fully digital drive operates in torque, velocity, or position mode and employs Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM. The drive can be configured for a variety of external command signals. Commands can also be configured using the drive’s built-in Motion Engine, an internal motion controller used with distributed motion applications. In addition to motor control, this drive features dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices. The DZXCANTE-008L080 features a single RS232 interface used for drive configuration and setup. Drive commissioning is accomplished using DriveWare® 7, available for download at www.a-m-c.com. The CANopen interface can be used for online operation in networked applications. All drive and motor parameters are stored in non-volatile memory. The DZXCANTE-008L080 conforms to the following specifications and is designed to the Environmental Engineering Considerations as defined in MIL-STD-810F.

Features

Metric Toggle
More Information
Vendor Advanced Motion Controls
Short Description 10-80 VDC Input; 4A continuous / 8A peak | 0.3kW Output @ 80 VDC in
Min Operating Temperature (°C) -40
Max Operating Temperature (°C) 85
Drive Architecture Digital
Min Input Supply Voltage (VDC) 10
Max Input Supply Voltage (VDC) 80
Max Continuous Output Current (A) 4
Max Peak Output Current (A) 8
Motor System Single Phase (Brushed, Voice Coil, Inductive Load), Three Phase (Brushless), Closed Loop Vector
Operating Mode Profile Current, Profile Velocity, Profile Position, Cyclic Synchronous Current, Cyclic Synchronous Velocity, Cyclic Synchronous Position
Configuration PCB Mounted
Min Operating Temperature (°F) -40
Max Operating Temperature (°F) 185
Number of Axes (Motors) 1
Commutation Sinusoidal,Trapezoidal
Max Rated Power (W) 304
Setup Manual
Series DZX Series
10-80 VDC Input; 4A continuous / 8A peak | 0.3kW Output @ 80 VDC in

Sample image only. Product may differ

Product Availability
Custom Order: Ships in 4-6 Weeks