DPRANIE-060A800

SKU
322819
Request Quote

The DigiFlex® Performance™ (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital drives operate in torque, velocity, or position mode and employ Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM. The drive can be configured for a variety of external command signals. Commands can also be configured using the drive’s built-in Motion Engine, an internal motion controller used with distributed motion applications. In addition to motor control, these drives feature dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.

This DP Series drive features an EtherCAT® interface for network communication using CANopen over EtherCAT (CoE), and a USB port for drive setup and commissioning using DriveWare® 7, available for download at www.a-m-c.com. All drive and motor parameters are stored in nonvolatile memory. The DPE Series Hardware Installation Manual is available for download at www.a-m-c.com.

Features

More Information
ManufacturerAdvanced Motion Controls
Youtube embed key1OptyK6om8A
Communication/InterfaceRS-485/232 / Modbus RTU
Drive ArchitectureDigital
FeedbackHall Effect Sensors, Incremental Encoder
Max Continuous Output Current (A)30.00
Max Input Supply Voltage (VAC)480.00
Max Operating Temperature (°C)75.00
Max Operating Temperature (°F)167.00
Max Peak Output Current (A)60.00
Max Rated Power (W)13680
Max Input Supply Voltage (VDC)747.00
Number of Axes1
Operating ModeCurrent, Hall Velocity, Velocity, Position
PhaseThree Phase
SetupManual
200-480 VAC (50/60 Hz, 3ph)put {optionally 255-747 VDC}; 30A continuous / 60A peak | 13.7kW Output @ 480 VAC

Sample image only. Product may differ

Product Availability
Product lead-times vary. Please call us for exact delivery times.

Product Videos