AZBDC40A8
SKU
322756
- Buy 5 for $309.00 each and save 5%
- Buy 10 for $293.00 each and save 10%
Product Details
The AZBDC40A8 PWM servo drive is designed to drive brushless and brushed DC motors at a high switching frequency. To increase system reliability and to reduce cabling costs, the drive is designed for direct integration into your PCB.
The AZBDC40A8 is fully protected against over-voltage, under-voltage, overcurrent, over-heating and short-circuits. A single digital output indicates operating status. The drive interfaces with digital controllers that have digital PWM output. The PWM IN duty cycle determines the output current and DIR input determines the direction of rotation.
This servo drive requires only a single unregulated isolated DC power supply, and is fully RoHS II (Reduction of Hazardous Substances) compliant.
Features
Metric Toggle
| Vendor | Advanced Motion Controls |
|---|---|
| Short Description | 10-80 VDC Input; 20A continuous / 40A peak | 1.5kW Output @ 80 VDC in |
| Commutation | Trapezoidal |
| Min Input Supply Voltage (VDC) | 10 |
| Max Input Supply Voltage (VDC) | 80 |
| Max Continuous Output Current (A) | 20 |
| Max Peak Output Current (A) | 40 |
| Motor System | Single Phase (Brushed, Voice Coil, Inductive Load), Three Phase (Brushless) |
| Operating Mode | Current |
| Feedback | Incremental Encoder, Hall Effect Sensors |
| Configuration | PCB Mounted |
| Drive Architecture | Analog |
| Series | AZ Series |
| Setup | Manual |
| Min Operating Temperature (°C) | 0 |
| Min Operating Temperature (°F) | 32 |
| Max Operating Temperature (°C) | 75 |
| Max Operating Temperature (°F) | 167 |
| Max Rated Power (W) | 1520 |
10-80 VDC Input; 20A continuous / 40A peak | 1.5kW Output @ 80 VDC in
Sample image only. Product may differ
Product Availability
Usually in Stock: Ships in 5-7 Days. Expedited Delivery Available. Please Inquire.
Related Products
