• Buy 5 for $726.00 each and save 2%
  • Buy 10 for $711.00 each and save 4%

For bulk orders request a quote 

Product Details

The SWM24SF-3AE integrated stepper is a drive+motor unit, fusing a NEMA 24 step motor and a sophisticated, 6.0 A/phase (peak-of-sine) step motor drive into a single IP65 rated device. Power to the drive, located at the rear of the motor, must be supplied by an external DC supply. See Related and Recommended Products below for compatible 24 and 48 volt DC power supplies.

The SWM24SF-3AE integrated stepper can operate in the following control modes: step (pulse) & direction, velocity (oscillator), and streaming serial commands (SCL). (SWM24 integrated steppers do not support stored-program operation with the Applied Motion 4-axis and 8-axis SiNet Hubs). All SWM24 integrated steppers are setup and configured using Applied Motion’s ST Configurator™ software. An integral 1000-line (4000 count/rev) incremental encoder is housed inside the same enclosure as the drive electronics, providing protection from dust and debris.

The integration of the encoder means the stepper can perform special functions not available otherwise. Stall Detection notifies the system as soon as the required torque is too great for the motor, which results in a loss of synchronization between the rotor and stator, also known as stalling. Stall Prevention actually prevents stalling of the step motor by dynamically adjusting motor speed to maintain synchronization of the rotor to the stator. This unique feature allows step motors to operate in a much broader range of applications than previously available to step motors, such as torque-control applications. The Stall Prevention feature also performs static position maintenance, which maintains the position of the motor shaft when at rest.

The SWM24SF-3AE comes with 4 digital I/O points, called Flex I/O points, because each point can be individually defined as an input or an output. As inputs, the Flex I/O points accept signals of 5-24 VDC and can be used for connecting pulse & direction signals, end-of-travel limit switches, jog switches, quadrature encoder signals, PLC outputs, sensors, or many other signal types. When defined as digital outputs, the Flex I/O points can be connected to PLC inputs, counters, lights, relays, or other devices. The unit also comes with 1 analog input that accepts 0-5 VDC signals, which can be used for velocity and position control.        The SWM24SF-3AE comes with an RS-232 port for programming and serial communications.

Please note that a VL series gearhead purchased for this motor will require a special mounting adaptor and 2 weeks lead time.

Please contact customer service for the price of this adaptor.


Metric Toggle
More Information
Vendor Applied Motion Products Inc.
Short Description Drive + Motor + Control Unit (RS232), NEMA 24, 2400 mNm Holding Torque, Intergral Encoder
Communications RS-232
Operating Mode Step & Direction, Velocity (Oscillator) and Streaming Commands
Min Input Supply Voltage (VDC) 12
Max Input Supply Voltage (VDC) 70
Feedback Integral Encoder
Max Shaft Diameter (mm) 8
Max Shaft Diameter (in) 0.315
Max Holding Torque (mNm) 2400
Max Holding Torque oz (in) 340
Motor Construction Hybrid Stepper
NEMA Frame Size 24
Motor Shape Square Body
Number of Axes (Motors) 1
Rotor Inertia (oz-in-s²) 1.27E-02 
Series SWM Series
Setup Software Setup
Step Angle (°) 1.8
Min Operating Temperature (°C) -20
Max Operating Temperature (°C) 50
Min Operating Temperature (°F) -4
Max Operating Temperature (°F) 122
Max Length (mm) 127.8
Max Length (in) 5.03
Shaft Orientation In-line,Double-ended (Encoder mounted)
Drive + Motor + Control Unit (RS232), NEMA 24, 2400 mNm Holding Torque, Intergral Encoder

Sample image only. Product may differ

Product Availability
Usually in Stock: Ships in 5-7 Days. Expedited Delivery Available. Please Inquire.

Product Attachments