- Buy 5 for $900.00 each and save 3%
- Buy 10 for $909.00 each and save 2%
The SVAC3-IP-E220 is a compact and cost-effective servo drive that is compatible with a variety of servo motors and a great choice for many OEM applications.
Its all-digital design and DSP-based current control allow for smooth motion and a quick response from the specially matched set of Applied Motion motors available with it. Power to the drive comes from single-phase 220 VAC and the drive can output up to 1.8 A rms continuous, 3.75 A rms peak to the servo motor. The drive also has built-in protection features like over-voltage, over-temperature, and over-current, which prevent damage to the drive while running in adverse conditions.
The SVAC3-IP-E220 incorporates EtherNet/IP network communications, the widely used industrial protocol for manufacturing automation applications. With EtherNet/IP users can control, configure and query the drive using an open, standards-based, industrial Ethernet connection at speeds up to 100 MBits/sec.
The SVAC3-IP drives run all of the same control modes as Q drives, with the addition that all drive features can be accessed over EtherNet/IP, including more than 100 commands and 130 registers for controlling motion, I/O, configuration, polling, math, register manipulation, and Q programming. For connecting to external devices such as limit switches, proximity or photoelectric sensors, PLC I/O, lamps, and other devices, the drive comes with 12 digital inputs, 6 digital outputs, and 1 analog input.
In addition to EtherNet/IP the drive supports Ethernet TCP and UDP protocols for sending commands from Applied Motionﾒs proprietary Serial Command Language (SCL). The same 10/100 Mbit Ethernet port on the drive is also used for tuning, configuring and programming the drive using the Quick Tuner™ and Q Programmer™ software applications. This servo motor drive is UL Recognized (File No. E332730), CE approved, and RoHS compliant.
|Product Category||Amplifiers - Digital Type|
|Manufacturer||Applied Motion Products|
|Short Description||Digital servo drive, sinusoidal commutation, (Ethernet, EtherNet/IP) 108-242 VAC; 1.8-3.5A Cont. (3.75-7.5 A Peak)|
Sample image only. Product may differ