STM17S-2AN

STM17S-2AN

SKU
315247
  • Buy 10 for $279.00 each and save 3%
$287.00

For bulk orders request a quote 

Product Details

The STM17S-2AN integrated stepper is a drive+motor unit, fusing a NEMA 17 step motor and a sophisticated 2.0 A/phase (peak-of-sine) stepper drive into a single device. Power to the drive, located at the rear of the motor, must be supplied by an external DC supply.

The STM17S-2AN integrated stepper can operate in the following control modes: step (pulse) & direction, velocity (oscillator), and streaming serial commands (SCL). (STM17 integrated steppers do not support operation with the Applied Motion 4-axis and 8-axis SiNet Hubs).

All STM17 units are setup and configured using Applied Motion’s ST Configurator™ software.

Each STM17 integrated stepper comes with 3 digital inputs, 1 digital output, and 1 analog input. The digital inputs accept signals of 5-24 VDC and can be used for connecting pulse & direction signals, end-of-travel limit switches, jog switches, quadrature encoder signals, PLC outputs, sensors, or many other signal types. The digital output can be connected to PLC inputs, counters, lights, relays, or other devices. The analog input accepts 0-5 VDC signals and can be used for velocity and position control.

The STM17S-2AN comes with an RS-232 port for programming and serial communications.

Features

Metric Toggle
More Information
Vendor Applied Motion Products Inc.
Short Description Drive + Motor + Control Unit (RS232)
Communications RS-232
Operating Mode Step & Direction, Velocity (Oscillator), Streaming Commands
Min Input Supply Voltage (VDC) 12
Max Input Supply Voltage (VDC) 48
Max Shaft Diameter (mm) 5
Max Shaft Diameter (in) 0.1969
Max Holding Torque (mNm) 381
Max Holding Torque oz (in) 54
Motor Construction Hybrid Stepper
NEMA Frame Size 17
Motor Shape Square Body
Number of Axes (Motors) 1
Rotor Inertia (kg-m-s²) 5.67E-06
Rotor Inertia (oz-in-s²) 8.03E-04
Series STM Series
Setup Software Setup
Step Angle (°) 1.8
Min Operating Temperature (°C) 0
Max Operating Temperature (°C) 85
Min Operating Temperature (°F) 32
Max Operating Temperature (°F) 185
Max Length (mm) 99
Shaft Orientation In-line,Single-nded
Drive + Motor + Control Unit (RS232)

Sample image only. Product may differ

Product Availability
Usually In Stock: Ships in 7-12 Days