- Buy 5 for $235.00 each and save 2%
- Buy 10 for $230.00 each and save 4%
The ST5-S stepper drive is a DC-powered microstepping drive for controlling two-phase, bipolar step motors. It offers advanced current control and a sophisticated 3rd generation anti-resonance algorithm that electronically dampens motor and system resonances to improve motor smoothness and usable torque over a wide speed range. The drive also employs electronic torque ripple smoothing and microstep emulation to greatly reduce motor noise and vibration. The drive must be powered from 24-48 VDC and can output up to 5.0 A/phase (peak-of-sine) to the step motor. Over-voltage, over-temperature and over-current protection features prevent damage while running in adverse conditions. The drive is complemented by a specifically matched set of NEMA 11 through NEMA 23 frame stepper motors.
The ST5-S can operate in the following control modes: step (pulse) & direction, velocity (oscillator), streaming serial commands (SCL), and operation with an Applied Motion 4-axis or 8-axis SiNet Hub. All ST drives are setup and configured using Applied Motion’s ST Configurator™ software. Preconfigured motor setup files included with ST Configurator™ make it easy to set up the drive for optimum results.
For connecting to external devices such as step & direction control signals, incremental encoders, limit switches, proximity or photoelectric sensors, PLC I/O, lamps, and other devices, the drive comes with 3 digital inputs, 1 digital output, and 1 single-ended analog input. Adjustable digital filters are present on the digital inputs for enhanced reliability in noisy environments.
The drive comes with an RS-232 port for configuration, serial communications and programming.
All ST drives are CE approved and RoHS compliant.
|Vendor||Applied Motion Products Inc.|
|Short Description||Digital stepper drive, 24-48 VDC input; 0.1-5 A output range, (RS232)|
|Operating Mode||Step & Direction, Velocity (Oscillator), Streaming Commands, SiNet Hub Compatible|
|Min Input Supply Voltage (VDC)||24|
|Max Input Supply Voltage (VDC)||48|
|Max Continuous Output Current (A)||5|
|Max Peak Output Current (A)||5|
|Number of Axes (Motors)||1|
|Min Operating Temperature (°C)||0|
|Min Operating Temperature (°F)||32|
|Max Operating Temperature (°C)||70|
|Max Operating Temperature (°F)||158|
|Min Continuous Output Current (A)||0.1|
Sample image only. Product may differ