ST5-IP-EN

ST5-IP-EN

SKU
315308
  • Buy 10 for $679.00 each and save 3%
$699.00

For bulk orders request a quote 

Product Details

The ST5-IP-EN stepper drive is a DC-powered microstepping drive for controlling two-phase, bipolar step motors. It offers advanced current control and a sophisticated 3rd generation anti-resonance algorithm that electronically dampens motor and system resonances to improve motor smoothness and usable torque over a wide speed range. The drive also employs electronic torque ripple smoothing and microstep emulation to greatly reduce motor noise and vibration. The drive must be powered from 24-48 VDC and can output up to 5.0 A/phase (peak-of-sine) to the step motor. Over-voltage, over-temperature and over-current protection features prevent damage while running in adverse conditions. The drive is complemented by a specifically matched set of NEMA 11 through NEMA 23 frame stepper motors.

The ST5-IP-EN incorporates EtherNet/IP network communications, the widely used industrial protocol for manufacturing automation applications. With EtherNet/IP users can control, configure and query the drive using an open, standards-based, industrial Ethernet connection at speeds up to 100 MBits/sec. The ST-IP drives run all of the same control modes as ST-Q drives, with the addition that all drive features can be accessed over EtherNet/IP, including more than 100 commands and 130 registers for controlling motion, I/O, configuration, polling, math, register manipulation, and Q programming.

For connecting to external devices such as control signals, incremental encoders, limit switches, proximity or photoelectric sensors, PLC I/O, lamps, and other devices, the drive comes with 8 digital inputs, 4 digital outputs, and 2 single-ended analog inputs (analog inputs can be wired together as 1 differential analog input). Adjustable digital filters are present on the digital inputs for enhanced reliability in noisy environments. In addition to EtherNet/IP the drive supports Ethernet TCP and UDP protocols for sending commands from Applied Motion’s proprietary Serial Command Language (SCL). The same 10/100 Mbit Ethernet port on the drive is also used for configuring and programming the drive using the ST Configurator™ and Q Programmer™ software applications, respectively.

All ST drives are CE approved and RoHS compliant.

Features

Metric Toggle
More Information
Vendor Applied Motion Products Inc.
Short Description Digital stepper drive, 24-48 VDC input; 0.1-5 A output range, (Ethernet, EtherNet/IP)
Communications EtherNet/IP, Ethernet
Operating Mode Streaming Commands, Analog Positioning, Encoder Following, Q Programming, EtherNet/IP
Min Input Supply Voltage (VDC) 24
Max Input Supply Voltage (VDC) 48
Max Continuous Output Current (A) 5
Max Peak Output Current (A) 5
Number of Axes (Motors) 1
Series ST5 Series
Setup Software Setup
Min Operating Temperature (°C) 0
Min Operating Temperature (°F) 32
Max Operating Temperature (°C) 70
Max Operating Temperature (°F) 158
Min Continuous Output Current (A) 0.1
Digital stepper drive, 24-48 VDC input; 0.1-5 A output range, (Ethernet, EtherNet/IP)

Sample image only. Product may differ

Product Availability
Usually In Stock: Ships in 5-7 Days