Model DPRAHIA-C100A400 - ABSOLUTE ENCODER FEEDBACK
Digital Input Sinusoidal Brushless Servo Amplifiers
200-240 VAC (or 255-373 VDC) Input, 50A cont.(100A pk) @ 255-373VDC Output
The DigiFlex® Performance™ (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital drives operate in torque, velocity, or position mode and employ Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM. The drive can be configured for a variety of external command signals. Commands can also be configured using the drive’s built-in Motion Engine, an internal motion controller used with distributed motion applications. In addition to motor control, these drives feature dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.
This DP Series drive features a single RS-232/RS-485 interface used for drive configuration and setup. Drive commissioning is accomplished using DriveWare® 7, available for download at www.a-m-c.com.
All drive and motor parameters are stored in non-volatile memory.
Absolute position feedback eliminates the need for a homing routine on drive power-up. There is also no need for Hall sensors for commutation.
DPR-series drives now support Indexing and Jogging commands using the Motion Engine feature in DriveWare® 7.
Features of Digital Input Sinusoidal Brushless Servo Amplifiers