PRODUCTS STEALS & DEALS TEXTBOOKS & VIDEOS TECHNICAL SUPPORT CUSTOMER SERVICE NEWS
Other Products
Model GM9236S025 - Brush Mini Gearmotor/Encoders, Economical
Model GM9236S025
Brush Mini Gearmotor/Encoders, Economical
Pittman
From: $261.00/ea
Model 8322S001 New Partnumber 8222S001 - Brush Mini Motor/Encoders, Economical
Model 8322S001 New Partnumber 8222S001
Brush Mini Motor/Encoders, Economical
Pittman
From: $198.00/ea
DPCANIR-015A400 -RESOLVER FEEDBACK - CANopen Input Sinusoidal Brushless Servo Amplifiers
DPCANIR-015A400 -RESOLVER FEEDBACK
CANopen Input Sinusoidal Brushless Servo Amplifiers
Advanced Motion Controls
From: $1,176.00/ea

Model 2035XD

Drivers with Oscillators

Dual axis 2.0A @ 35VDC output Full/Half Step Drive with Oscillator

Model 2035XD - Drivers with Oscillators
from $276.00/ea

The 2035XD step motor driver is a two axis, software configured step/direction or oscillator drive. Drives can be quickly and precisely configured using our eXposition software and a Windows PC. When configured for pulse/direction mode, the two drives can be commanded by the step and direction signals available from many PLCs and step motor indexers. In oscillator mode, the two drives generate their own acceleration and deceleration profiles and are commanded by digital run/stop signals. These signals can be supplied by PLCs, mechanical switches, single board computers or other motion control devices. Speeds may be fixed or can be set "on the fly" by 0 to 5 volt analog signals.

Product Availability:
Usually In Stock: Ships in 5-7 Days
(Expedited Airfreight Option Available For Sooner Delivery)

Features of Drivers with Oscillators

  • DC bus voltage 12-35 VDC motor supply (including ripple)
  • Software programmable motor current, 0.1-2.0 amps/phase
  • Software programmable step size, 200-50800 steps/rev
  • Automatic idle current reduction
  • Four optically isolated digital inputs: step/run 1, step/run 2, direction 1, direction 2
  • Two analog inputs, 10 bit resolution, 0 - 5VDC
  • On-board oscillator generates step pulses and accel/decel ramps
  • Fixed speed or proportional to analog input
  • Optically isolated 5-24 VDC Tach output for monitoring speed
  • 70 watts of usable power per axis
  • Screw terminal connectors
  • Dual H-bridge, inaudible PWM amplifier
  • 3 state, pulse width modulated current control, switching at 20-30 KHz
  • Drives 4, 6 or 8 lead size 11, 14, 17 or 23 step motors

Name/Description 1-4 (US$) 5-9 (US$) 10-24 (US$)
Dual axis Full/Half Step Drive with Oscillator
2035XD
 276.00  276.00  270.00
 

Select items to add to your shopping cart.

* Call for special quantity pricing.

 
 Links to Downloadable Files:
Spec Sheet
Download Size: 98.36 kb
User Manual
Download Size: 149.43 kb
White Paper: Recommended Step Motor & Drive Combinations
Download Size: 42.37 kb
 External Links to Downloadable Files:
-Complete Catalog
http://www.applied-motion.com/sites/default/files/pdf/2008_Catalog.pdf

" Dear Mr. Warren Osak; I write this mail to thank you for your Help to make this purchase possible and..."

-Hani Baset

Add Your Comment  |  Read More Comments

"Kaye, once again I'd like to thank you very much for your efforts yesterday in helping us sourcing a servo..."

-David P., CTS

Add Your Comment  |  Read More Comments

SERVO2GO is a Proud Sponsor of Geneva Centre for Autism