Other Products
Nema 17 High Torque Step Motor - NEMA 17 Frame Stepper Motors
Nema 17 High Torque Step Motor
NEMA 17 Frame Stepper Motors
Applied Motion Products, Inc.
From: $32.00/ea
Model DPRALTE-020B080 - ENCODER FEEDBACK - Digital Input Sinusoidal Brushless Servo Amplifiers
Digital Input Sinusoidal Brushless Servo Amplifiers
Advanced Motion Controls
From: $605.00/ea
Model 10A8DD - PWM Input Brush Servo Amplifiers
Model 10A8DD
PWM Input Brush Servo Amplifiers
Advanced Motion Controls
From: $365.00/ea

RCM3400 Series

Core Modules

RabbitCore Models RCM3400, RCM3410

RCM3400 Series - Core Modules
from $58.00/ea

The RCM3400 analog RabbitCore provides a known-good processor and analog input subsystem for OEMs to quickly integrate into custom designs. The RCM3400 features a low-EMI Rabbit 3000-based CPU subsystem running at 29.4 MHz, with 512K Flash / 512K SRAM or 256K Flash / 256K SRAM, 5 serial ports, and 8 channels of programmable gain analog input in an extremely small footprint (1.37" x 1.16" / 34 x 29 mm). The RCM3400 comes with a pre-assigned MAC I.D. to be Ethernet ready and the development board features 10/100Base-T Ethernet and can be used as a reference design in conjunction with Dynamic C's royalty-free TCP/IP software libraries. Extensive demo programs and software application templates make it easy to get the RCM3400 up and running in record time.

RabbitCores mount directly on a user-designed motherboard and can interface with all manner of CMOS-compatible digital devices. Two 34-pin connectors route 47 digital I/O (shared with serial ports), power, and other signals to the motherboard. Built-in low EMI features, including a clock spectrum spreader, practically eliminate EMI problems, helping OEMs pass CE and regulatory RF emissions tests.

The RCM3400 is equipped with 5 V tolerant I/O, quadrature encoder inputs, PWM outputs, and pulse capture and measurement capabilities. The RCM3400 also features a battery-backable real-time clock, glueless memory and I/O interfacing, and low-power "sleepy" modes. A fully enabled 8-bit slave port permits easy master-slave interfacing with another processor-based system, and an alternate I/O bus can be configured for 8 data lines and 6 address lines (shared with parallel I/O).

Programmed with Dynamic C, the RCM3400 executes math, logic, and I/O exceptionally quickly. The Rabbit 3000 chip, RCM3400, and Dynamic C were designed in a complementary fashion for maximum performance and ease of use in embedded systems. Our industry-proven Dynamic C® development system is a C language environment that includes an editor, compiler, and in-circuit debugger. User programs can be compiled, executed, and debugged using Dynamic C and a programming cable-no in-circuit emulator is required. An extensive library of drivers and sample programs is provided, including royalty-free TCP/IP stack with source code.

Designing with RabbitCores The RabbitCore family of microprocessor core modules is designed to facilitate rapid development and implementation of embedded systems. RabbitCores are powered by high-performance 8-bit Rabbit microprocessors with extensive integrated features and a C-friendly instruction set designed for use with the Dynamic C® development system. The RabbitCore mounts on a user-designed motherboard and acts as the controlling microprocessor for the user's system. Small in size but packed with powerful features, these core modules give designers a complete package for control and communication.

Programming the RCM3400 Programs are developed using Z-World's industry-proven Dynamic C software development system (SE version included in low-cost development kits). An extensive library of drivers and sample programs is provided.

Product Availability:
Usually In Stock: Ships in 5-7 Days
(Expedited Airfreight Option Available For Sooner Delivery)

Features of Core Modules


  • 3.3 V operation
  • Powerful Rabbit 3000 microprocessor
  • Low-EMI (typically <10 dB V/m @ 3 m)
  • Up to 512K Flash / 512K SRAM
  • 8 channel 12-bit A/D with programmable gain
  • 47 digital I/O, alternate I/O bus
  • 5 serial ports (IrDA, SDLC/HDLC, asynch, SPI)
  • MAC ID installed

Design Advantages

  • Ready-made platform for fast time-to-market
  • Compact size simplifies integration
  • Dynamic C® development environment for real-time development and debugging
  • Exceptionally fast performance for math, logic, I/O

Name/Description 1-4 (US$) 5-9 (US$) 10-24 (US$)
Model RCM3410
 58.00  58.00  58.00
Complete Development Kit with RCM3400 and Dynamic C Software
 388.00  388.00  388.00
Model RCM3400
 67.00  67.00  67.00

Select items to add to your shopping cart.

* Call for special quantity pricing.

There are no listed accessories for this product at this time.
 Links to Downloadable Files:
Spec Sheet: RCM3000-3100-3200-3400 Series Spec Sheet.pdf
Download Size: 243.06 kb
 External Links to Downloadable Files:
-Optional Software for SBC&d=100117
-Software: Dynamic C Premier
-Software: Dynamic C Sample Programs
-User Manual:
-User Manual:
-White Paper: http://www.rabbitsem...m/products/US_RCMGuide_022505.pdf

"I cannot thank you enough for your help and support. I look forward to your comments on the code that I will forward..."

-Gary D., DG Consulting Services

Add Your Comment  |  Read More Comments

"Hi Warren, The quote looked good and I have asked our purchasing department to act on it. Your company is on AECL's..."

-Gordon T., AECL

Add Your Comment  |  Read More Comments

SERVO2GO is a Proud Sponsor of Geneva Centre for Autism