PRODUCTS STEALS & DEALS TEXTBOOKS & VIDEOS TECHNICAL SUPPORT CUSTOMER SERVICE NEWS
Other Products
DZXCANTE-008L080 - CANopen Input Trapezoidal Brushless Servo Amplifiers: Extended Environment Models
DZXCANTE-008L080
CANopen Input Trapezoidal Brushless Servo Amplifiers: Extended Environment Models
Advanced Motion Controls
From: $495.00/ea
Model DPRANIE-060A800 -ENCODER FEEDBACK - Digital Input Sinusoidal Brushless Servo Amplifiers
Model DPRANIE-060A800 -ENCODER FEEDBACK
Digital Input Sinusoidal Brushless Servo Amplifiers
Advanced Motion Controls
From: $2,692.00/ea
Model GM14902S017 - Brush Mini Gearmotor, Economical
Model GM14902S017
Brush Mini Gearmotor, Economical
Pittman
From: $231.00/ea

DMC-2000

USB/RS232 Stand-Alone Motion Controllers

1 - 8 Axes Stand-Alone Optima Series Motion Controller

DMC-2000 - USB/RS232 Stand-Alone Motion Controllers
from $1,595.00/ea

The DMC-2000 stand-alone motion controller is a member of the Optima Series, Galil's latest generation of multi-axis motion controllers. The DMC-2000 is the first motion controller in the market designed for the high-speed, flexible Universal Serial Bus (USB)-which is projected as the industry standard for local network communications between PCs and peripherals.

The controller is packaged in a compact, rugged enclosure and contains an internal power supply for direct connection to 90-250 V AC. The DMC-2000 controllers accommodate 1- through 8-axis formats and allow control of step or servo motors on any combination of axes. Any mode of motion can be programmed including linear and circular interpolation, contouring, electronic gearing and ecam.

Programming the DMC-2000 is simplified with two-letter, intuitive commands and a full set of software tools such as WSDK for servo tuning and analysis, ActiveX Tool Kit for Visual Basic users and a C-Programmers Tool Kit.

Product Availability:
Custom Order: Ships in 1-2 Weeks
(Expedited Airfreight Option Available For Sooner Delivery)

Features of USB/RS232 Stand-Alone Motion Controllers

  • Provides USB 12 Mb/s expansion hub with two ports and two RS232/422 ports up to 115kb.
  • Accepts up to 12 MHz encoder frequencies for servos and 3 MHz for steppers
  • Advanced PID compensation with Velocity and Acceleration feedforward, integration limits, notch filter and low-pass filter. Sample times to 62.5 microseconds per axis
  • Modes of motion include jogging, point-to-point positioning, contouring, linear and circular interpolation, electronic gearing and ECAM
  • Multitasking for concurrent execution of up to eight application programs
  • Non-volatile memory for application programs, variables and arrays
  • Dual encoders, home input and forward and reverse limits accepted for every axis
  • 8 Uncommitted inputs and 8 outputs for 1- through 4-axes models, 16 inputs and 16 outputs for 5- through 8-axis models
  • 8 uncomitted analog inputs
  • 64 configurable I/O
  • High speed position latch and output compare
  • Sinusoidal commutation for brushless servo motors
  • High-density shielded cables and optical isolation for noise immunity. CE certified.
  • 12.1" x 2.2" x 6.3" metal enclosure; Accepts 90-250V AC
  • Custom hardware and firmware options available
  • Ceramic Motor Option allows precise control for all Ceramic Motors.

Name/Description 1-4 (US$) 5-9 (US$) 10-24 (US$)
USB, RS232 1-axis
DMC-2010
 1,595.00  1,595.00  1,515.00
16-bit analog-to-digital
-16 bit ADC for analog inputs
 100.00  100.00  95.00
Shunt regulator for AMP-195x0
-SR for AMP-195x5
 50.00  50.00  47.00
ICM with two 500W servo drives
AMP-19520
 595.00  595.00  565.00
ICM with four 500W servo drives
AMP-19540
 795.00  795.00  765.00
100-pin cable; 1 meter
CABLE - 100 - 1m
 175.00  175.00  170.00
100-pin cable; 2 meter
CABLE - 100 - 2m
 190.00  190.00  185.00
100-pin cable; 4 meter
CABLE - 100 - 4m
 210.00  210.00  205.00
Auxiliary encoder cable;1 meter
CABLE - 36 - 1m
 90.00  90.00  85.00
Auxiliary encoder cable;3 meter
CABLE - 36 - 3m
 110.00  110.00  105.00
Extended I/O cable; 1 meter
CABLE - 80 - 1m
 135.00  135.00  130.00
Extended I/O cable; 4 meter
CABLE - 80 - 4m
 160.00  160.00  155.00
RS232 cable
CABLE 9-pin D
 10.00  10.00  10.00
USB cable in 2 meter
CABLE-USB-2M
 10.00  10.00  10.00
USB cable in 3 meter
CABLE-USB-3M
 15.00  15.00  15.00
Legacy to Optima Converter board
CB-1500-100
 50.00  50.00  50.00
Option for DC power input
DC converter option for -2xx0 box
 100.00  100.00  95.00
USB, RS232 2-axis
DMC-2020
 1,995.00  1,995.00  1,895.00
USB, RS232 3-axis
DMC-2030
 2,395.00  2,395.00  2,275.00
USB, RS232 4-axis
DMC-2040
 2,595.00  2,595.00  2,465.00
USB, RS232 5-axis
DMC-2050
 2,895.00  2,895.00  2,750.00
USB, RS232 6-axis
DMC-2060
 3,095.00  3,095.00  2,940.00
USB, RS232 7-axis
DMC-2070
 3,295.00  3,295.00  3,130.00
USB, RS232 8-axis
DMC-2080
 3,495.00  3,495.00  3,320.00
Interconnect for DMC-2xx0
ICM-2900
 295.00  295.00  275.00
ICM with opto outputs
ICM-2900-OPTO
 345.00  345.00  325.00
ICM for auxiliary encoders
ICM-2908
 125.00  125.00  120.00
Opto isolation for 64 I/O
IOM-1964
 695.00  695.00  645.00
SSI Interface; Adder to DMC-22xx
SSI option
 50.00  50.00  49.00
Panel-mount terminal
TERM-P
 945.00  945.00  900.00
 

Select items to add to your shopping cart.

* Call for special quantity pricing.

 
 Links to Downloadable Files:
 External Links to Downloadable Files:
-Spec Sheet
http://www.galil.com/download/datasheet/ds_2xx0.pdf
-Bulletin Board
http://www.galilmc.com/forum
-Application Notes
http://www.galilmc.com/learn/application-notes

"Thank you for all of your support over the past year."

-Dave R., LAI

Add Your Comment  |  Read More Comments

"I just wanted to thank you for your help with the linear actuator. We have just started our experiments and it..."

-Steve J., Bodycoat

Add Your Comment  |  Read More Comments

SERVO2GO is a Proud Sponsor of Geneva Centre for Autism