- Buy 10 for $532.00 each and save 3%
The HW23-754 two-phase stepper motor is suitable for a wide range of motion control applications including wet factory environments and outdoor use.
The IP65 rating means the motor is dust proof and resistant to lower pressure water jets.
Key features of this rating include an integral 10 ft shielded cable, a nickel plated brass cable gland, sealed laminations and a front shaft contact seal. This motor also has an internal corrosion-resistant film coating, further protecting it in wet and humid environments.
IP65 specifies a product that is dust tight (no ingress of dust; complete protection against contact) and protected against water jets (water projected by a nozzle from any direction shall have no harmful effects).
|Vendor||Applied Motion Products Inc.|
|Short Description||NEMA 23 Frame, IP 65 Rated, 1603 mNm Holding Torque|
|Motor Type||High torque|
|Max Holding Torque (mNm)||1603|
|NEMA Frame Size||23|
|Gearing Type||Motor Only|
|Motor Construction||Hybrid Stepper|
|Rotor Inertia (kg-m-s²)||4.60E-05|
|Rotor Inertia (oz-in-s²)||6.51E-03|
|Shaft Orientation||In-line,Double-ended (Encoder mounted)|
|Max Shaft Diameter (mm)||6.35|
|Max Shaft Diameter (in)||0.25|
|Max Length (mm)||99.7|
|Min Operating Temperature (°C)||-20|
|Min Operating Temperature (°F)||-4|
|Max Operating Temperature (°C)||50|
|Max Operating Temperature (°F)||122|
Sample image only. Product may differ