The HT34-497 two-phase stepper motor is designed for use with the STAC5 and STAC6 series of stepper drives and is suitable for a wide range of motion control applications.
The motor is optimized for use with high bus-voltage drives and comes with an integral 10 ft shielded cable.
The motor is terminated with 8 motor leads plus 1 ground lead making it easy to connect the motor to the drive depending on the drive voltage being used. For 120 VAC applications the motor leads must be connected in parallel. For 220 VAC applications the motor leads must be connected in series.
Note: The HT34-497 step motor supersedes the HT34-490 step motor in 120 VAC applications with the STAC6 stepper drives.
Features
Manufacturer | Applied Motion Products |
---|---|
Environment | Dust-proof |
Feedback | Integral Encoder |
Gearing Type | Motor Only |
Max Current Per Phase (A) | 5.1 |
Max Holding Torque (mNm) | 11962 |
Max Holding Torque oz (in) | 1694 |
Max Length (mm) | 156 |
Max Length (in) | 6.14 |
Max Number Of Leads | 8 |
Max Operating Temperature (°C) | 50 |
Max Operating Temperature (°F) | 122 |
Shaft Diameter (mm) | 8 |
Shaft Diameter (in) | 0.32 |
Motor Construction | Hybrid Stepper |
Motor Shape | Square Body |
Motor Type | High torque |
NEMA Frame Size | 34 |
Shaft Orientation | In-line,Double-ended (Encoder mounted) |
Step Angle (°) | 1.8 |
Product Category | NEMA Frame Stepper Motors |

Sample image only. Product may differ