The HT34-488 two-phase stepper motor is designed for use with the STAC6 series of stepper drives (120 VAC input versions only) and is suitable for a wide range of motion control applications. The motor comes with an integral 10 ft shielded cable and a preassembled drive connector for easy connection to a STAC6 drive.
When not used with STAC6 drives, the preassembled drive connector can be removed to reveal 8 motor leads plus 1 ground lead. The 8 motor leads can be connected in one of three ways to the step motor drive of your choice: bipolar series (required for STAC6 drives), bipolar parallel, or unipolar.
Note: The HT34-488 step motor has been superseded by the HT34-495 step motor for use in all new applications with STAC6 stepper drives.
|Manufacturer||Applied Motion Products|
|Gearing Type||Motor Only|
|Max Current Per Phase (A)||8.5|
|Max Holding Torque (mNm)||3919|
|Max Holding Torque oz (in)||555|
|Max Length (mm)||79|
|Max Length (in)||3.11|
|Max Number Of Leads||8|
|Max Operating Temperature (°C)||50|
|Max Operating Temperature (°F)||122|
|Shaft Diameter (mm)||12.7|
|Shaft Diameter (in)||0.5|
|Motor Construction||Hybrid Stepper|
|Motor Shape||Square Body|
|Motor Type||High torque|
|NEMA Frame Size||34|
|Step Angle (°)||1.8|
|Product Category||NEMA Frame Stepper Motors|
Sample image only. Product may differ