HT34-488
SKU
315105
- Buy 10 for $407.00 each and save 3%
Product Details
The HT34-488 two-phase stepper motor is designed for use with the STAC6 series of stepper drives (120 VAC input versions only) and is suitable for a wide range of motion control applications. The motor comes with an integral 10 ft shielded cable and a preassembled drive connector for easy connection to a STAC6 drive.
When not used with STAC6 drives, the preassembled drive connector can be removed to reveal 8 motor leads plus 1 ground lead. The 8 motor leads can be connected in one of three ways to the step motor drive of your choice: bipolar series (required for STAC6 drives), bipolar parallel, or unipolar.
Note: The HT34-488 step motor has been superseded by the HT34-495 step motor for use in all new applications with STAC6 stepper drives.
Features
Metric Toggle
| Manufacturer | Applied Motion Products |
|---|---|
| Short Description | NEMA 34 Frame, 3919 mNm Holding Torque, 1.8 degrees step angle |
| Environment | Dust-proof |
| Gearing Type | Motor Only |
| Max Current Per Phase (A) | 8.5 |
| Max Holding Torque (mNm) | 3919 |
| Max Holding Torque oz (in) | 555 |
| Max Length (mm) | 79 |
| Max Length (in) | 3.11 |
| Max Number Of Leads | 8 |
| Max Operating Temperature (°C) | 50 |
| Max Operating Temperature (°F) | 122 |
| Min Operating Temperature (°C) | -20 |
| Min Operating Temperature (°F) | -4 |
| Shaft Diameter (mm) | 12.7 |
| Shaft Diameter (in) | 0.5 |
| Motor Construction | Hybrid Stepper |
| Motor Shape | Square Body |
| Motor Type | High torque |
| NEMA Frame Size | 34 |
| Series | HT34 Series,vendor=Applied Motion Products Inc. |
| Shaft Orientation | Single-ended |
| Step Angle (°) | 1.8 |
| Product Category | NEMA Frame Stepper Motors |
NEMA 34 Frame, 3919 mNm Holding Torque, 1.8 degrees step angle
Sample image only. Product may differ
Product Availability
Usually in Stock: Ships in 5-7 Days. Expedited Delivery Available. Please Inquire.