- Buy 5 for $108.00 each and save 2%
- Buy 10 for $106.00 each and save 4%
The HT23-553 two-phase stepper motor is designed for use with the STAC5 and STAC6 series of stepper drives and is suitable for a wide range of motion control applications.
The motor is optimized for use with high bus-voltage drives and comes with an integral 10 ft shielded cable.
The motor is terminated with 8 motor leads plus 1 ground lead making it easy to connect the motor to the drive depending on the drive voltage being used. For 120 VAC applications the motor leads must be connected in parallel. For 220 VAC applications the motor leads must be connected in series.
Note: The HT23-553 step motor supersedes the HT23-549 step motor in 120 VAC applications with the STAC6 stepper drives.
|Vendor||Applied Motion Products Inc.|
|Short Description||NEMA 23 Frame, 1179 mNm Holding Torque, 1.8 degrees step angle|
|Max Holding Torque (mNm)||1179|
|Max Holding Torque oz (in)||167|
|Max Number Of Leads||8|
|Step Angle (°)||1.8|
|Max Shaft Diameter (mm)||6.35|
|Max Shaft Diameter (in)||0.25|
|Max Length (mm)||55|
|Max Length (in)||2.17|
|NEMA Frame Size||23|
|Gearing Type||Motor Only|
|Motor Construction||Hybrid Stepper|
|Motor Shape||Square Body|
|Motor Type||High torque|
|Max Current Per Phase (A)||1.41|
|Min Operating Temperature (°C)||-20|
|Max Operating Temperature (°C)||50|
|Min Operating Temperature (°F)||-4|
|Max Operating Temperature (°F)||122|
Sample image only. Product may differ