The DZXCANTE-015L080 digital servo drive is designed to drive brushed and brushless servomotors from a compact form factor ideal for embedded applications. This fully digital drive operates in torque, velocity, or position mode and employs Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM.
The drive can be configured for a variety of external command signals. Commands can also be configured using the drive’s built-in Motion Engine, an internal motion controller used with distributed motion applications. In addition to motor control, this drive features dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.
The DZXCANTE-015L080 features a single RS232 interface used for drive configuration and setup.
Drive commissioning is accomplished using DriveWare® 7, available for download at www.a-m-c.com.
The CANopen interface can be used for online operation in networked applications.
All drive and motor parameters are stored in non-volatile memory.
The DZXCANTE-015L080 conforms to the following specifications and is designed to the Environmental Engineering Considerations as defined in MIL-STD-810F.
|Manufacturer||Advanced Motion Controls|
|Youtube embed key||1OptyK6om8A|
|Product Category||Amplifiers - Ext. Environment|
|Motor System||Single Phase (Brushed, Voice Coil, Inductive Load), Three Phase (Brushless), Closed Loop Vector|
|Min Operating Temperature (°F)||-40.00|
|Max Operating Temperature (°F)||185.00|
|Min Operating Temperature (°C)||-40.00|
|Max Operating Temperature (°C)||85.00|
|Max Input Supply Voltage (VDC)||80.00|
|Max Continuous Output Current (A)||7.50|
|Max Peak Output Current (A)||15.00|
|Max Rated Power (W)||570|
|Operating Mode||Cyclic Synchronous Velocity, Cyclic Synchronous Current, Cyclic Synchronous Position, Profile Current, Profile Velocity, Profile Position|
|Number of Axes||1|
Sample image only. Product may differ