DZSANTU-020B080

DZSANTU-020B080

SKU
322845
  • Buy 5 for $499.00 each and save 5%
  • Buy 10 for $473.00 each and save 10%
$525.00

For bulk orders request a quote 

Product Details

The DZSANTU-020B080 digital servo drive is designed to drive brushed and brushless servomotors from a compact form factor ideal for embedded applications. This fully digital drive operates in torque, velocity, or position mode and employs Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM.

The command source can be generated internally or can be supplied externally. In addition to motor control, this drive features dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.

The DZSANTU-020B080 supports ADVANCED Motion Controls’ exclusive ‘DxM’ technology which allows connectivity of up to 3 DZSANTU-020B080 drives to a single DZEANTU-020B080 on an EtherCAT® network.

DZSANTU-020B080 drives receive commands from a DZEANTU-020B080 over a high speed communication interface, allowing for up to 4 axes of servo drive control from a single EtherCAT connection.

Drive commissioning and setup is accomplished through a USB interface using DriveWare available for download at www.a-m-c.com.

All drive and motor parameters are stored in nonvolatile memory.

Features

Metric Toggle
More Information
Vendor Advanced Motion Controls
Short Description 18-80 VDC Input; 10A continuous / 20A peak | 0.8kW Output @ 80 VDC in
Min Operating Temperature (°C) 0
Max Operating Temperature (°C) 75
Drive Architecture Digital
Min Input Supply Voltage (VDC) 18
Max Input Supply Voltage (VDC) 80
Max Continuous Output Current (A) 10
Max Peak Output Current (A) 20
Motor System Single Phase (Brushed, Voice Coil, Inductive Load), Three Phase (Brushless), Closed Loop Vector
Operating Mode Profile Current, Profile Velocity, Profile Position, Cyclic Synchronous Current, Cyclic Synchronous Velocity, Cyclic Synchronous Position
Configuration PCB Mounted
Min Operating Temperature (°F) 32
Max Operating Temperature (°F) 167
Number of Axes (Motors) 1
Commutation Sinusoidal,Trapezoidal
Max Rated Power (W) 760
Setup Manual
Series DZX Series
18-80 VDC Input; 10A continuous / 20A peak | 0.8kW Output @ 80 VDC in

Sample image only. Product may differ

Product Availability
Custom Order: Ships in 4-6 Weeks