- Buy 5 for $452.00 each and save 5%
- Buy 10 for $428.00 each and save 10%
The DZRALTE-060L080 digital servo drive is designed to drive brushed and brushless servomotors from a compact form factor ideal for embedded applications. This fully digital drive operates in torque, velocity, or position mode and employs Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM.
The drive can be configured for a variety of external command signals. Commands can also be configured using the drive’s built- in Motion Engine, an internal motion controller used with distributed motion applications.
In addition to motor control, this drive features dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.
Network communication is accomplished using either RS-485/232 or Modbus RTU.
This DZR Series drive features a single serial interface used for drive commissioning via DriveWare® 7, available for download at www.a-m-c.com.
|Vendor||Advanced Motion Controls|
|Short Description||10-80 VDC Input; 30A continuous / 60A peak | 2.3kW Output @ 80 VDC in|
|Min Input Supply Voltage (VDC)||10|
|Max Input Supply Voltage (VDC)||80|
|Max Continuous Output Current (A)||30|
|Max Peak Output Current (A)||60|
|Motor System||Single Phase (Brushed, Voice Coil, Inductive Load), Three Phase (Brushless), Closed Loop Vector|
|Operating Mode||Current, Velocity, Hall Velocity, Position|
|Configuration||PCB Mounted, OEM Module|
|Communications||RS-485/232 / Modbus RTU|
|Number of Axes (Motors)||1|
|Min Operating Temperature (°C)||0|
|Max Operating Temperature (°C)||60|
|Min Operating Temperature (°F)||32|
|Max Operating Temperature (°F)||140|
|Max Rated Power (W)||2280|
Sample image only. Product may differ