DZPANTU-020B200

DZPANTU-020B200

SKU
322840
  • Buy 5 for $741.00 each and save 5%
  • Buy 10 for $702.00 each and save 10%
$780.00

For bulk orders request a quote 

Product Details

The DZPANTU-020B200 digital servo drive is designed to drive brushed and brushless servomotors from a compact form factor ideal for embedded applications. This fully digital drive operates in torque, velocity, or position mode and employs Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM.

The drive can be configured for a variety of external command signals. Commands can also be configured using the drive’s built-in Motion Engine, an internal motion controller used with distributed motion applications. In addition to motor control, this drive features dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.

DZPANTU-020B200 drives feature an Ethernet interface for network communication using Ethernet POWERLINK, Modbus TCP or Ethernet, and USB connectivity for drive commissioning using DriveWare® 7, available for download at www.a-m-c.com.

All drive and motor parameters are stored in non-volatile memory.

The DZPANTU Series Hardware Installation Manual is available for download at www.a-m-c.com.

Features

Metric Toggle
More Information
Vendor Advanced Motion Controls
Short Description 40-175 VDC Input; 10A continuous / 20A peak | 1.7kW Output @ 175 VDC in
Commutation Sinusoidal,Trapezoidal
Min Input Supply Voltage (VDC) 40
Max Input Supply Voltage (VDC) 175
Max Continuous Output Current (A) 10
Max Peak Output Current (A) 20
Motor System Single Phase (Brushed, Voice Coil, Inductive Load), Three Phase (Brushless), Closed Loop Vector
Operating Mode Current, Velocity, Position
Feedback Incremental Encoder, Hall Effect Sensors, 1Vp-p Sine/Cosine Encoder, Absolute Encoder (EnDat®2.1/2.2, Hiperface® or BiSS C-Mode)
Configuration PCB Mounted
Communications Ethernet / Ethernet POWERLINK / Modbus TCP
Drive Architecture Digital
Number of Axes (Motors) 1
Setup Manual
Series DZP Series
Min Operating Temperature (°C) 0
Max Operating Temperature (°C) 75
Min Operating Temperature (°F) 32
Max Operating Temperature (°F) 167
Max Rated Power (W) 1663
40-175 VDC Input; 10A continuous / 20A peak | 1.7kW Output @ 175 VDC in

Sample image only. Product may differ

Product Availability
Custom Order: Ships in 4-6 Weeks

Product Attachments