- Buy 5 for $461.00 each and save 5%
- Buy 10 for $437.00 each and save 10%
The DZCANTU-020B080 digital servo drive is designed to drive brushed and brushless servomotors, stepper motors, and AC induction motors from a compact form factor ideal for embedded applications. This fully digital drive operates in torque, velocity, or position mode and employs Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM.
The drive can be configured for a variety of external command signals. Commands can also be configured using the drive’s built-in Motion Engine, an internal motion controller used with distributed motion applications.
In addition to motor control, this drive features dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.
|Vendor||Advanced Motion Controls|
|Short Description||18-80 VDC Input, 10 A Cont. (20 Peak)|
|Min Input Supply Voltage (VDC)||18|
|Max Input Supply Voltage (VDC)||80|
|Max Continuous Output Current (A)||10|
|Max Peak Output Current (A)||20|
|Motor System||Three Phase (Brushless Servo), Stepper (2- or 3-Phase Closed Loop), Single Phase (Brushed Servo,Voice Coil,Inductive Load), AC Induction (Closed Loop Vector)|
|Operating Mode||Current, Velocity, Interpolated Position Mode (PVT), Position, Cyclic Synchronous Modes, Profile Modes|
|Feedback||Tachometer, Incremental Encoder, 1Vp-p Sine/Cosine Encoder, Hiperface®, ±10 VDC Position, Auxiliary Incremental Encoder, Halls, EnDat®, BiSS C-Mode|
|Configuration||PCB Mounted, OEM Module|
|Number of Axes (Motors)||1|
|Min Operating Temperature (°C)||0|
|Max Operating Temperature (°C)||75|
|Min Operating Temperature (°F)||32|
|Max Operating Temperature (°F)||167|
|Max Rated Power (W)||760|
Sample image only. Product may differ