- Buy 5 for $490.00 each and save 5%
- Buy 10 for $464.00 each and save 10%
The DZCANTE-060L080 digital servo drive is designed to drive brushed and brushless servomotors from a compact form factor ideal for embedded applications. This fully digital drive operates in torque, velocity, or position mode and employs Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM.
The drive can be configured for a variety of external command signals. Commands can also be configured using the drive’s built- in Motion Engine, an internal motion controller used with distributed motion applications.
In addition to motor control, this drive features dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.
he DZCANTE-060L080 features a single RS232 interface used for drive configuration and setup.
Drive commissioning is accomplished using DriveWare® 7, available for download at www.a-m-c.com.
The CANopen interface can be used for online operation in networked applications.
|Vendor||Advanced Motion Controls|
|Short Description||10-80 VDC Input; 30A continuous / 60A peak | 2.3kW Output @ 80 VDC in|
|Min Input Supply Voltage (VDC)||10|
|Max Input Supply Voltage (VDC)||80|
|Max Continuous Output Current (A)||30|
|Max Peak Output Current (A)||60|
|Motor System||Single Phase (Brushed, Voice Coil, Inductive Load), Three Phase (Brushless), Closed Loop Vector|
|Operating Mode||Profile Current, Profile Velocity, Profile Position, Interpolated Position Mode (PVT)|
|Configuration||PCB Mounted, OEM Module|
|Number of Axes (Motors)||1|
|Min Operating Temperature (°C)||0|
|Max Operating Temperature (°C)||60|
|Min Operating Temperature (°F)||32|
|Max Operating Temperature (°F)||140|
|Max Rated Power (W)||2280|
Sample image only. Product may differ