- Buy 5 for $1,283.00 each and save 5%
- Buy 10 for $1,215.00 each and save 10%
The DVC200A100 DigiFlex® Performance™ digital servo drive is designed to drive brushed, brushless, and AC induction servomotors from a compact form factor ideal for embedded applications. This fully digital drive operates in torque, velocity, or position mode and employs Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM.
DVC200A100 servo drives feature a single USB interface used for drive configuration and setup.
Drive commissioning is accomplished using DriveWare® 7, available for download at www.a-m-c.com.
The CANopen interface can be used for runtime operation in networked applications.
DVC200A100 servo drives are packaged in a ruggedized, watertight IP65 rated enclosure ideal for mobile electric vehicular applications. Multiple throttle input command types and configurations are available for selection within DriveWare® 7.
All drive and motor parameters are stored in nonvolatile memory.
The DVC Series Hardware Installation Manual is available for download at www.a-m-c.com.
|Vendor||Advanced Motion Controls|
|Short Description||20-80 VDC Input; 125A continuous / 200A peak | 9.5kW Output @ 80 VDC in|
|Shaft Orientation||In-line, Double-ended (Encoder mounted)|
|Min Input Supply Voltage (VDC)||20|
|Max Input Supply Voltage (VDC)||80|
|Motor System||Single Phase (Brushed, Voice Coil, Inductive Load), Three Phase (Brushless), Closed Loop Vector|
|Operating Mode||Profile Current, Profile Velocity, Profile Position, Interpolated Position Mode|
|Min Operating Temperature (°C)||0|
|Min Operating Temperature (°F)||32|
|Max Operating Temperature (°C)||75|
|Max Operating Temperature (°F)||167|
|Number of Axes (Motors)||1|
|Max Rated Power (W)||9500|
|Max Continuous Output Current (A)||125|
|Max Peak Output Current (A)||200|
Sample image only. Product may differ