- Buy 5 for $899.00 each and save 5%
- Buy 10 for $852.00 each and save 10%
The DigiFlex® Performance™ (DP) Series digital servo drives are designed to drive brushed and brushless servomotors, stepper motors, and AC induction motors. These fully digital drives operate in torque, velocity, or position mode and employ Space Vector Modulation (SVM), which results in higher bus voltageutilization and reduced heat dissipation compared to traditional PWM.
The drive can be configured for a variety of external command signals. Commands can also be configured using the drive’s built-in Motion Engine, an internal motion controller used with distributed motion applications.
In addition to motor control, these drives feature dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.
Features
Vendor | Advanced Motion Controls |
---|---|
Short Description | 100-240 VAC (50/60 Hz, 3ph) Input {optionally 127-373 VDC}, 7.5A continuous / 15A peak |
Commutation | Sinusoidal|Trapezoidal |
Min Input Supply Voltage (VAC) | 100 |
Min Input Supply Voltage (VDC) | 127 |
Max Input Supply Voltage (VAC) | 240 |
Max Input Supply Voltage (VDC) | 373 |
Max Continuous Output Current (A) | 7.5 |
Max Peak Output Current (A) | 15 |
Motor System | Three Phase (Brushless Servo), Stepper (2- or 3-Phase Closed Loop), Single Phase (Brushed Servo,Voice Coil,Inductive Load), AC Induction (Closed Loop Vector) |
Operating Mode | Current, Velocity, Interpolated Position Mode (PVT), Position, Cyclic Synchronous Modes, Profile Modes |
Feedback | Tachometer, Incremental Encoder, ±10 VDC Position, Auxiliary Incremental Encoder, Halls |
Configuration | Panel Mount |
Communications | RS-485/232 |
Drive Architecture | Digital |
Frequency (Hz) | 50, 60 |
Number of Axes (Motors) | 1 |
Setup | Computer Interface |
Series | DPR Series |
Min Operating Temperature (°C) | 0 |
Max Operating Temperature (°C) | 75 |
Min Operating Temperature (°F) | 32 |
Max Operating Temperature (°F) | 167 |
Max Rated Power (W) | 2415 |