DPRAHIE-040A400

DPRAHIE-040A400

SKU
322809
  • Buy 5 for $1,229.00 each and save 5%
  • Buy 10 for $1,164.00 each and save 10%
$1,293.00

For bulk orders request a quote 

Product Details

The DigiFlex® Performance™ (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital drives operate in torque, velocity, or position mode and employ Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM. The drive can be configured for a variety of external command signals. Commands can also be configured using the drive’s built-in Motion Engine, an internal motion controller used with distributed motion applications. In addition to motor control, these drives feature dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.

This DP Series drive features an EtherCAT® interface for network communication using CANopen over EtherCAT (CoE), and a USB port for drive setup and commissioning using DriveWare® 7, available for download at www.a-m-c.com. All drive and motor parameters are stored in nonvolatile memory. The DPE Series Hardware Installation Manual is available for download at www.a-m-c.com.

Features

Metric Toggle
More Information
Vendor Advanced Motion Controls
Short Description 100-240 VAC (50/60 Hz, 3ph) Input {optionally 127-373 VDC}; 20A continuous / 40A peak | 6.4kW Output @ 240 VAC in
Commutation Sinusoidal,Trapezoidal
Min Input Supply Voltage (VAC) 100
Min Input Supply Voltage (VDC) 127
Max Input Supply Voltage (VAC) 240
Max Input Supply Voltage (VDC) 373
Max Continuous Output Current (A) 20
Max Peak Output Current (A) 40
Motor System Single Phase (Brushed, Voice Coil, Inductive Load), Three Phase (Brushless), Closed Loop Vector
Operating Mode Current, Velocity, Hall Velocity, Position
Feedback Resolver
Configuration Panel Mount
Communications RS-485/232 / Modbus RTU
Drive Architecture Digital
Frequency (Hz) 50,60
Number of Axes (Motors) 1
Phase Three Phase
Setup Manual
Series DPR Series
Min Operating Temperature (°C) 0
Max Operating Temperature (°C) 75
Min Operating Temperature (°F) 32
Max Operating Temperature (°F) 167
Max Rated Power (W) 6441
100-240 VAC (50/60 Hz, 3ph) Input {optionally 127-373 VDC}; 20A continuous / 40A peak | 6.4kW Output @ 240 VAC in

Sample image only. Product may differ

Product Availability
Custom Order: Ships in 4-6 Weeks

Product Attachments