Request Quote
Product Details

The B060A400AC PWM servo drive is designed to drive brushless DC motors at a high switching frequency. A single red/green LED and a single digital output indicate operating status. The drive is fully protected against over-voltage, under voltage, over -current, over-heating and short-circuits across motor, ground and power leads.

Furthermore, the drive can interface with digital controllers or be used stand-alone, and requires a single unregulated AC or DC power supply and a nominal 24 VDC logic supply. Loop gain, current limit, input gain, offset, and ramp can be adjusted using 14-turn potentiometers. The offset adjusting potentiometer can also be used as an on-board input signal for testing purposes.

The drive accepts quadrature encoder inputs or Hall sensor inputs for velocity control.


More Information
ManufacturerAdvanced Motion Controls
Product CategoryAmplifiers - Analog Type
Max Input Supply Voltage (VAC)240.00
Max Input Supply Voltage (VDC)373.00
Max Continuous Output Current (A)30.00
Max Peak Output Current (A)60.00
Motor SystemSingle Phase (Brushed, Voice Coil, Inductive Load), Three Phase (Brushless)
Operating ModeCurrent, Duty Cycle, Encoder Velocity, Hall Velocity, IR Comp, Tachometer, Voltage
ConfigurationPanel Mount
Drive ArchitectureAnalog
PhaseThree Phase
Min Operating Temperature (°C)0.00
Min Operating Temperature (°F)32.00
Max Operating Temperature (°C)75.00
Max Operating Temperature (°F)167.00
Max Rated Power (W)10630
200-240 VAC (50/60 Hz, 3ph)put {optionally 255-373 VDC}; 30A continuous / 60A peak | 10.6kW Output @ 240 VAC

Sample image only. Product may differ

Product Availability
Estimated 10-12 week lead times. Please call for exact times.