- Buy 5 for $494.00 each and save 5%
- Buy 10 for $468.00 each and save 10%
The AZXBH25A8 PWM servo drive is designed to drive brushless DC motors at a high switching frequency. To increase system reliability and to reduce cabling costs, the drive is designed for direct integration into your PCB.
The AZXBH25A8 is fully protected against over-voltage, under-voltage, over-current, over-heating, invalid commutation, and short-circuits. A single digital output indicates operating status. The drive interfaces with digital controllers that have analog ±10V output.
The AZXBH25A8 can utilize either Hall Sensor or Tachometer feedback for velocity control.
This servo drive requires only a single unregulated isolated DC power supply, and is fully RoHS II (Reduction of Hazardous Substances) compliant.
The AZXBH25A8 conforms to the following specifications and is designed to the Environmental Engineering Considerations as defined in MIL-STD-810F.s
|Product Category||Amplifiers - Analog Type|
|Manufacturer||Advanced Motion Controls|
|Short Description||10-80 VDC Input, 12.5 A Cont. (25 Peak)|
|Min Input Supply Voltage (VDC)||10|
|Max Input Supply Voltage (VDC)||80|
|Max Continuous Output Current (A)||12.5|
|Max Peak Output Current (A)||25|
|Motor System||Single Phase (Brushed, Voice Coil, Inductive Load), Three Phase (Brushless)|
|Operating Mode||Current, Duty Cycle, Hall Velocity, Tachometer Velocity|
|Feedback||Hall Effect Sensors, Tachometer (± 60 VDC)|
|Configuration||PCB Mounted, OEM Module|
|Series||AZX Series,vendor=Advanced Motion Controls|
|Min Operating Temperature (°C)||-40|
|Min Operating Temperature (°F)||-40|
|Max Operating Temperature (°C)||105|
|Max Operating Temperature (°F)||221|
|Max Rated Power (W)||950|
Sample image only. Product may differ