- Buy 5 for $599.00 each and save 5%
- Buy 10 for $567.00 each and save 10%
The AZXBH16A20 PWM servo drive is designed to drive brushless DC motors at a high switching frequency. To increase system reliability and to reduce cabling costs, the drive is designed for direct integration into your PCB.
The AZXBH16A20 is fully protected against over-voltage, under-voltage, over-current, overheating, invalid commutation, and short-circuits. A single digital output indicates operating status. The drive interfaces with digital controllers that have analog ±10V output. The AZXBH16A20 can utilize either Hall Sensor or Tachometer feedback for velocity control.
This servo drive requires only a single unregulated isolated DC power supply, and is fully RoHS II (Reduction of Hazardous Substances) compliant.
|Vendor||Advanced Motion Controls|
|Short Description||40-175 VDC Input; 8A continuous / 16A peak | 1.33kW Output @ 80 VDC in|
|Min Operating Temperature (°C)||-40|
|Max Operating Temperature (°C)||105|
|Min Input Supply Voltage (VDC)||40|
|Max Input Supply Voltage (VDC)||175|
|Max Continuous Output Current (A)||8|
|Max Peak Output Current (A)||16|
|Motor System||Single Phase (Brushed, Voice Coil, Inductive Load), Three Phase (Brushless)|
|Operating Mode||Current, Duty Cycle, Hall Velocity, Tachometer Velocity|
|Feedback||Hall Effect Sensors, Tachometer (± 60 VDC)|
|Configuration||PCB Mounted, OEM Module|
|Min Operating Temperature (°F)||-40|
|Max Operating Temperature (°F)||221|
|Number of Axes (Motors)||1|
|Max Rated Power (W)||1330|
Sample image only. Product may differ