- Buy 5 for $494.00 each and save 5%
- Buy 10 for $468.00 each and save 10%
The AZXBE25A8 PWM servo drive is designed to drive brushless DC motors at a high switching frequency. To increase system reliability and to reduce cabling costs, the drive is designed for direct integration into your PCB.
The AZXBE25A8 is fully protected against over-voltage, under-voltage, over-current, over-heating, invalid commutation, and short-circuits. A single digital output indicates operating status. The drive interfaces with digital controllers that have analog ±10V output.
The AZXBE25A8 can utilize either quadrature encoder inputs or Tachometer feedback for velocity control.
This servo drive requires only a single unregulated isolated DC power supply, and is fully RoHS (Reduction of Hazardous Substances) compliant.
The AZXBE25A8 conforms to the following specifications and is designed to the Environmental Engineering Considerations as defined in MIL-STD-810F.
|Manufacturer||Advanced Motion Controls|
|Short Description||10-80 VDC Input; 12.5A continuous / 25A peak | 1kW Output @ 80 VDC in|
|Min Operating Temperature (°C)||-40|
|Max Operating Temperature (°C)||105|
|Min Input Supply Voltage (VDC)||10|
|Max Input Supply Voltage (VDC)||80|
|Max Continuous Output Current (A)||12.5|
|Max Peak Output Current (A)||25|
|Motor System||Single Phase (Brushed, Voice Coil, Inductive Load), Three Phase (Brushless)|
|Operating Mode||Current, Duty Cycle, Encoder Velocity, Tachometer Velocity|
|Configuration||PCB Mounted, OEM Module|
|Min Operating Temperature (°F)||-40|
|Max Operating Temperature (°F)||221|
|Number of Axes (Motors)||1|
|Max Rated Power (W)||950|
|Series||AZX Series,vendor=Advanced Motion Controls|
|Product Category||Amplifiers - Extended Environment|
Sample image only. Product may differ