- Buy 5 for $347.00 each and save 5%
- Buy 10 for $329.00 each and save 10%
The AZXBDC8A8 PWM servo drive is designed to drive brushless and brushed DC motors at a high switching frequency. To increase system reliability and to reduce cabling costs, the drive is designed for direct integration into your PCB.
The AZXBDC8A8 is fully protected against over-voltage, under-voltage, over-current, overheating and short-circuits. A single digital output indicates operating status. The drive interfaces with digital controllers that have digital PWM output. The PWM IN duty cycle determines the output current and DIR input determines the direction of rotation.
This servo drive requires only a single unregulated isolated DC power supply, and is fully RoHS II (Reduction of Hazardous Substances) compliant.
|Vendor||Advanced Motion Controls|
|Short Description||10-80 VDC Input; 4A continuous / 8A peak | 0.3kW Output @ 80 VDC in|
|Min Operating Temperature (°C)||-40|
|Max Operating Temperature (°C)||105|
|Min Input Supply Voltage (VDC)||10|
|Max Input Supply Voltage (VDC)||80|
|Max Continuous Output Current (A)||4|
|Max Peak Output Current (A)||8|
|Motor System||Single Phase (Brushed, Voice Coil, Inductive Load), Three Phase (Brushless)|
|Feedback||Incremental Encoder, Hall Effect Sensors|
|Min Operating Temperature (°F)||-40|
|Max Operating Temperature (°F)||221|
|Number of Axes (Motors)||1|
|Max Rated Power (W)||304|
Sample image only. Product may differ