- Buy 5 for $385.00 each and save 5%
- Buy 10 for $365.00 each and save 10%
The AZBH60A8 servo drive is designed to drive brushlessand brushed DC motors at a high switching frequency. To increase system reliability and to reduce cabling costs, the drive is designed for direct integration into your PCB.
The AZBH60A8 is fully protected against over-voltage, under-voltage, over-current, over-heating, invalid commutation, and short circuits. A single digital output indicates operating status. The drive interfaces with digital controllers that have analog +/-10V output.
The AZBH60A8 can utilize either Hall Sensor or Tachometer feedback for velocity control.
This servo drive requires only a single unregulated isolated DC power supply, and is fully RoHS (Reduction of Hazardous Substances) compliant.
|Vendor||Advanced Motion Controls|
|Short Description||10-80 VDC Input; 30A continuous / 60A peak | 2.3kW Output @ 80 VDC in|
|Min Input Supply Voltage (VDC)||10|
|Max Input Supply Voltage (VDC)||80|
|Max Continuous Output Current (A)||30|
|Max Peak Output Current (A)||60|
|Motor System||Single Phase (Brushed, Voice Coil, Inductive Load), Three Phase (Brushless)|
|Operating Mode||Current, Duty Cycle, Encoder Velocity, Tachometer Velocity|
|Configuration||PCB Mounted, OEM Module|
|Min Operating Temperature (°C)||0|
|Min Operating Temperature (°F)||32|
|Max Operating Temperature (°C)||75|
|Max Operating Temperature (°F)||167|
|Max Rated Power (W)||2280|
Sample image only. Product may differ