- Buy 5 for $167.00 each and save 5%
- Buy 10 for $158.00 each and save 10%
The AZ6A8 PWM servo drive is designed to drive brush-type DC motors at a high switching frequency. To increase system reliability and to reduce cabling costs, the drive is designed for direct integration into your PCB.
The AZ6A8 is fully protected against over-voltage, over-current, over-heating and short-circuits. A single digital output indicates operating status. The drive interfaces with digital controllers that have analog +/-10V output.
This servo drive requires only a single unregulated isolated DC power supply, and is fully RoHS (Reduction of Hazardous Substances) compliant.
|Vendor||Advanced Motion Controls|
|Short Description||20-80 VDC Input; 3A continuous / 6A peak | 0.2kW Output @ 80 VDC in|
|Min Input Supply Voltage (VDC)||20|
|Max Input Supply Voltage (VDC)||80|
|Max Continuous Output Current (A)||3|
|Max Peak Output Current (A)||6|
|Motor System||Single Phase (Brushed, Voice Coil, Inductive Load)|
|Operating Mode||Current (Torque) Mode|
|Configuration||PCB Mounted, OEM Module|
|Min Operating Temperature (°C)||0|
|Min Operating Temperature (°F)||32|
|Max Operating Temperature (°C)||75|
|Max Operating Temperature (°F)||167|
|Max Rated Power (W)||228|
Sample image only. Product may differ