120A10
SKU
322745
- Buy 5 for $832.00 each and save 5%
- Buy 10 for $788.00 each and save 10%
Product Details
The 120A10 PWM servo drive is designed to drive brush type DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive is fully protected against over-voltage, under voltage, over-current, over-heating and short-circuits across motor, ground and power leads.
Furthermore, the drive can interface with digital controllers or be used stand-alone and requires only a single unregulated DC power supply. Loop gain, current limit, input gain and offset can be adjusted using 14-turn potentiometers. The offset adjusting potentiometer can also be used as an on-board input signal for testing purposes.
Features
Metric Toggle
| Vendor | Advanced Motion Controls |
|---|---|
| Short Description | 20-80 VDC Input; 60A continuous / 120A peak | 4.6kW Output @ 80 VDC in |
| Commutation | Trapezoidal |
| Min Input Supply Voltage (VDC) | 20 |
| Max Input Supply Voltage (VDC) | 80 |
| Max Continuous Output Current (A) | 60 |
| Max Peak Output Current (A) | 120 |
| Motor System | Single Phase (Brushed, Voice Coil, Inductive Load) |
| Operating Mode | Current, IR Compensation, Velocity, Voltage |
| Feedback | Tachometer |
| Configuration | Panel Mount |
| Drive Architecture | Analog |
| Series | Brushed Analog Series |
| Setup | Manual |
| Min Operating Temperature (°C) | 0 |
| Min Operating Temperature (°F) | 32 |
| Max Operating Temperature (°C) | 65 |
| Max Operating Temperature (°F) | 149 |
| Max Rated Power (W) | 4560 |
20-80 VDC Input; 60A continuous / 120A peak | 4.6kW Output @ 80 VDC in
Sample image only. Product may differ
Product Availability
Usually In Stock: Ships in 7-12 Days
Related Products
//= /* @escapeNotVerified */ __('Check items to add to the cart or') ?>
//= /* @escapeNotVerified */ __('select all') ?>
