Linear Stepper Motors
25mm diameter, 7.5 degree/step, 30 or 60mm effective stroke
|
A low-cost linear stepper motor, Nippon Pulse's LINEARSTEP® series, is a stand alone actuator that does not need external feedback or bearings.
LINEARSTEP® motors offer direct linear motion without any mechanical transformers and therefore allow you to design a simple system at a fraction of the cost of conventional rotary stepper motors. The PFL, PFCL series offers the design engineer the ultimate in flexibility to match the applications requirements.
You can use Nippon Pulse linear stepper motors in many different applications including syringe/pumps, hexapods, and low cost linear stages.
Partnumber Configurator:
Example partnumber PFCL25-48Q404830
| PF = Stepper Motor Designation |
Q = Coil rating C: 12V unipolar D: 5V unipolar P: 12V bipolar (PFCL25 only) Q: 5V bipolar R: 12V bipolar (PFL35T only) |
| C = Connector Type Blank: Flying lead joint C: Connector joint |
4 = Neodymium magnet type |
| L = Linear step series designation |
048 = Thread Pitch 048: 0.48mm 096: 0.96mm 120: 1.20mm |
| 25 = Motor diameter in mm 25mm 35mm |
30 = Shaft Stroke Length 30: 30mm stroke, 60mm shaft 60: 60mm stroke, 60mm shaft |
| 48 = steps/revolution 24: 15°/step 48: 7.5°/step |
**Note: a 5pc minimum order requirement applies to these Linear Stepper Motors**
