CANopen Input Trapezoidal Brushless Servo Amplifiers: Extended Environment Models
10-80 VDC Input, 20A continuous (40A peak)@ 10-80 VDC Output
|
The DZXCANTE-040L080 digital servo drive is designed to drive brushed and brushless servomotors from a compact form factor ideal for embedded applications. This fully digital drive operates in torque, velocity, or position mode and employs Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM. The command source can be generated internally or can be supplied externally. In addition to motor control, this drive features dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.
The DZXCANTE-015L080 features a single RS232 interface used for drive configuration and setup. Drive commissioning is accomplished using DriveWare available at www.a-m-c.com. The CANopen interface can be used for online operation in networked applications.
The DZXCANTE-015L080 conforms to the following specifications and is designed to the Environmental Engineering Considerations as defined in MIL-STD-810F.
Extended Environment Performance
Ambient Temperature
-40°C to +75°C (-40°F to +167°F)
Storage Temperature
-50°C to +100°C (-58°F to +212°F)
Thermal Shock
-40°C to +75°C (-40°F to +167°F) in 2 min.
Relative Humidity
0 to 95% Non-Condensing
Vibration
30 Grms for 5 min. in 3 axes
Z-Drives are a culmination of advances in manufacturing technology. By utilizing dual sided PCB boards, high efficiency power devices and creative design we are able to make the Z-Drives possible. These drives have been designed to be integrated into your PCB and come in multiple architechtures with features previously found only in larger drives. No wires and smaller size = less cost and easier installation - just plug'm in!
Features include:
- Four Quadrant Regenerative Operation
- Space Vector Modulation (SVM) Technology
- Fully Digital State-of-the-art Design
- Programmable Gain Settings
- Fully Configurable
- PIDF Velocity Loop
- PID + FF Position Loop
- Compact Size, High Power Density
- 16-bit Analog to Digital Hardware
