Digital Input Sinusoidal Brushless Servo Amplifier/Positioner
108-242 VAC Input, 3.5A cont.(7.5A pk)@ 151-339 VDC Output
The SVAC3 series servo drives are compact and cost-effective. They include a simple tuning interface with advanced features like jerk filtering for S-curve acceleration. Compatible with a variety of servo motors equipped with high-resolution commutating encoders, the SVAC3 servo drives are a great choice for many OEM applications.
Power to the SVAC3 drives comes from 120 or 220 volts AC (single-phase). Complementing the SVAC3 drives, Applied Motion offers a specially matched set of brushless servo motors in NEMA 17, 23, 34, and Metric 40 and 60 mm frame sizes. The SVAC3-120 is powered from 120 VAC and outputs up to 3.5 A continuous, 7.5 A peak. The SVAC3-220 is powered from 220 VAC and outputs up to 1.8 A continuous, 3.75 A peak.
There are 3 control options available with the SVAC3 servo drives: S, Q and IP.
- “S” drives can operate in analog torque/velocity, pulse & direction, and streaming serial (SCL) control modes. Select the control mode, tune the servo motor and configure the drive using the Quick Tuner™ software
- “Q” drives can operate in all of the same control modes as S drives, plus they have the ability to run stand-alone Q programs stored in non-volatile memory. Q program are created using the Q Programmer™ software, and provide multi-tasking, math functions, conditional processing, data register manipulation, and more features in a robust yet simple text-based programming language. Like S drives, Q drives must first be set up and tuned using the Quick Tuner™ software
- “IP” drives come with built-in EtherNet/IP network communications, the widely used industrial protocol for manufacturing automation applications. With EtherNet/IP, users can control, configure and query the drive using an open, standards-based, industrial Ethernet connection at speeds up to 100 Mbits/sec. The SVAC3-IP drives run all of the same control modes as Q drives, with the addition that all drive features can be accessed over EtherNet/IP, including more than 100 commands and 130 registers for controlling motion, I/O, configuration, polling, math, register manipulation, and Q programming. SVAC3-IP drives are set up and configured using Quick Tuner™, while Q programs are created using Q Programmer™
For connecting to external devices such as limit switches, proximity or photoelectric sensors, PLC I/O, lamps, and other devices, SVAC3-S drives include 4 digital inputs, 2 digital outputs, and 1 analog input. SVAC3-Q and SVAC3-IP drives include 12 digital inputs, 6 digital outputs, and 1 analog input.
All SVAC3 servo drives include Ethernet ports for configuration and programming. The Ethernet ports are fast 10/100 Mbit, and support both TCP and UDP communication packets. The Ethernet ports of IP drives support EtherNet/IP communications as well.
SVAC3 drives are UL Recognized (File No. E332730), CE approved, and RoHS compliant.